- Inductance1.0 µH
- I rated3.2 A
- DCR45 mΩ
Product Catalog
Spanning from electronic DESIGN to the SALE of electronic components.
Two series, 10 categories and 120 part numbers — the passives that filter and store, the actives that switch and protect. Every line item is held or sourced factory-original, inspected in batch, and shipped with full traceability.
Inductors, capacitors, resistors and timing devices — the parts that filter, store and stabilise every rail in your design.
Chip power inductors, also known as high-current inductors, sit in series with the supply rail: they pass DC and present high impedance to high-frequency pulses. Low DC resistance and a high rated current are achieved through a unique winding structure, so the part stays cool at full load.
Chip inductors, also known as surface-mount inductors, are the leadless miniature components built for Surface Mount Technology, exactly like other chip components. A multilayer ceramic body keeps them compact while holding a stable inductance across the operating temperature range.
Large capacitance in a small can, with high ripple handling and a low unit cost. The trade-off is leakage current, finite life and strict polarity, which makes these parts the natural choice for power filtering and low-frequency circuits.
Thick-film chip resistors from 0201 to 2512, with a boosted power series for the same footprint. Standard tolerance is ±1%, and every case size below carries its own maximum working voltage so you can derate with confidence.
Packaged timing references from 32.768 kHz up to 100 MHz, in 2016, 3225, 5032 and 7050 footprints. CMOS output, ±10 ppm stability options and low phase noise make them suitable for both RTC keep-alive and high-speed digital clocking.
Switching, rectifying and clamping devices that carry the load current and absorb the surge before it reaches your circuit.
N-channel power MOSFETs from 30 V logic-level parts up to 650 V high-voltage switches. Low RDS(on) in DFN and TO packages keeps conduction loss down, while the avalanche-rated cells survive the transients that switching supplies throw at them.
Instead of a PN junction, the Schottky barrier diode is built on a metal-semiconductor contact. There is no minority carrier storage, so it switches off with no reverse recovery tail — the reason it dominates the freewheeling path of switching supplies.
Connected in parallel with the circuit it protects, the TVS conducts within nanoseconds when an overvoltage arrives and shunts the surge away, then resets automatically. Response is faster than a varistor or a gas discharge tube, which is why it sits closest to the connector.
An LED and a photodetector in one package, with nothing but light between them. That optical link is what carries the signal across the isolation barrier, keeping high-voltage transients and ground noise on the far side of your control circuit.
A MOSFET gate welded to a bipolar output stage: easy voltage drive on the input, low saturation loss on the output. Trench field-stop construction covers 600 V to 1700 V, for motor drives, induction heating and high-power inverters.
Specifications shown are typical values for each series. Contact our engineering team for full datasheets, tolerance ranges, MOQ and current stock — or send your BOM for a free replacement and cost review.